The tunnel from Hazrat Nizamuddin will be 17m below the ground or road level, and will be located inside the park on the Sarai Kale Khan side. It will go 12m below the Ring Road crossing.
On the other side of the Yamuna, the height of pillars on the 2.46km viaduct varies from 7m to 18m. "The pier height at the Mayur Vihar crossing will be 18m from the ground or road level," added Dayal.
To build the bridge, entire segments were placed using launchers. Explaining this `segmental launching' technique, Dayal said, "These segments are installed en bloc along the length of a span, then pre-stress is introduced into the structure via external tendons, which results in faster construction".
The bridge has 15 spans and 16 pillars. Seven of the spans measure 42.6m, six 42.1m and two 26m. Each pillar rises 10m above the water level.
All 16 piers were anchored in the riverbed using well foundation technology.
To build the bridge, 8,000 cubic metres of soil was dug out. This was utilized in the 360m-long guide bund on the Yamuna bank towards Sarai Kale Khan.
While the bridge is complete, DMRC officials said preliminary work on the tunnel is still on.
"It requires shifting of underground utilities. Civil work will start soon," said Dayal. While the elevated ramp is almost ready, 15% civil work has been done on the underground ramp. The 2.46km viaduct is also almost complete, said officials.
The bridge is part of the Lajpat Nagar-Trilokpuri stretch on the 59km Mukundur-Shiv Vihar corridor of Metro's Phase-III.
http://timesofindia.indiatimes.com/followceleb.cms?alias=Yamuna,pillars,Nizamuddin road bridge,DMRC
Anda sedang membaca artikel tentang
A Metro twin for Nizamuddin bridge
Dengan url
http://sehatputihgigiku.blogspot.com/2014/08/a-metro-twin-for-nizamuddin-bridge.html
Anda boleh menyebar luaskannya atau mengcopy paste-nya
A Metro twin for Nizamuddin bridge
namun jangan lupa untuk meletakkan link
A Metro twin for Nizamuddin bridge
sebagai sumbernya
0 komentar:
Posting Komentar